3 Layer Disposable Medical Mask

Executive standard: EN 14683:2014 IIR, ASTM F2100 Level 1

BFE: Bacterial filtration efficiency : ≥ 95%,

  • This protective face mask is suitable for filtering dust, droplets, and other harmful particles in the air.
  • May reduce virus inflation rate by serving as an additional barrier between individuals.
  • Improves upon good social- distancing practices.

Material: Made with melt-blown, nonwoven electrostatic cotton.

  • Outer layer non-woven: water and fluid barrier
  • Middle layer: core filter by meltblown film
  • Inner layer :non-woven fabric as hygroscopic layer

KN95 Protective Mask

Executive standard: EN 149: 2001 FFP2

These KN95 protective masks designed for medical staffs to wear over the face and used to prevent transmission of virus from patients to medical staffs, suitable for protecting clinical medical staffs during invasive operation, filter particulates in the air, block droplets, blood, body fluids and secretions. Effectively reduce the spread of viruses and bacterial particles and filter virus particles and aerosols below 0.24 microns. Filtration efficiency is above 95%. Capable of blocking blood spatter from pressures above 80 mmHG. Can be used in ICU, highly contaminated areas which requires high level of protection for the medical staffs.

  • Made of SMS synthetic non-woven fiber fabric, SMS is composed of spunbond and meltblown.
  • SMS features good breathing ability, filtering performance, no adhesive, and non-toxicity.
  • Outer layer spunbond non-woven fabric has high strength, water barrier, isolating blood and body fluid spatter. Middle layer of meltblown is the core filter, inside layer is hygroscopic.
  • Electret processing meltblown non-woven fabric efficiently filter various non-oily particles, prevent the spread of viruses, bacterial and microorganism with two-way protection.
  • Antistatic treatment to reduce the absorption of harmful substances such as dust particles and bacteria.
  • High strength, high toughness, high durability, dual barrier to particles and microorganisms.

Production Line:

Nitrile Gloves

Quality standard: FDA 510(K), CE, ISO EN

Test Standard: ASTM D6319, EN 455-1-2

Material: Nitrile Butadiene Rubber (NBR), 100% latex free.

Weights: Low-weight with same quality guarantee for medical application, 3.5g or 4.0g

Feature: Textured, Ambidextrous, beaded

Length : Regular 240mm/9.4”

Textured: Finger- Palm, or Full

Physical Properties:

  • TENSILE > 20MPa
  • Modulus @300%, 3.5-4.5
  • Elongation 550%

Colors: Light Blue, Blue, White, Black, Purple, Pink.

Medical Goggle

Materials: Ultra-scratch-resistant polycarbonate lenses and lightweight PVC frame with 12 mm width elastic band. Soft and flexible, comfortable, and stress-free.

  • Protects from dust, pollutants, and other irritants
  • Improves upon good social-distancing practices
  • Fits over prescription glasses
  • Fog preventive coating for a crystal clear view
  • No vent, fully covered and protective

Face Shield

Materials: Transparent, recyclable PET; sponge; and 20mm width elastic band.

  • Lightweight and clear for optimal visibility
  • Comfortable to wear and stress-free
  • Protects from dust, pollutants, and other irritants
  • Improves upon good social-distancing practices